|
|
3.DRILL CHUCKS ARBROS - DIN 238
- Manufactured from tool steel
- Precision hardened and ground.
|
 |
| CAT
No. |
DIN
No. |
Morse
Taper No. |
Min.
Order Qty. |
Std.
Packing |
| DA-10/MT-1 |
B10 |
MT1 |
50 |
300 |
| DA-10/MT-2 |
|
MT1 |
100 |
200 |
| DA-12/MT-1 |
B12 |
MT1 |
100 |
300 |
| DA-12/MT-2 |
|
MT2 |
100 |
200 |
| DA-12/MT-3 |
|
MT3 |
100 |
100 |
| DA-16/MT-1 |
B16 |
MT1 |
100 |
300 |
| DA-16/MT-2 |
|
MT2 |
100 |
200 |
| DA-16/MT-3 |
|
MT3 |
100 |
100 |
| DA-16/MT-4 |
|
MT4 |
40 |
40 |
| DA-18/MT-1 |
B18 |
MT1 |
100 |
250 |
| DA-18/MT-2 |
|
MT2 |
100 |
150 |
| DA-18/MT-3 |
|
MT3 |
100 |
100 |
| DA-18/MT-4 |
|
MT4 |
40 |
40 |
| DA-22/MT-1 |
B22 |
MT1 |
50 |
200 |
| DA-22/MT-2 |
|
MT2 |
100 |
100 |
| DA-22/MT-3 |
|
MT3 |
50 |
75 |
| DA-22/MT-4 |
|
MT4 |
40 |
40 |
| DA-24/MT-1 |
B24 |
MT1 |
50 |
75 |
| DA-24/MT-2 |
|
MT2 |
40 |
40 |
| DA-24/MT-3 |
|
MT3 |
25 |
25 |
4.PIN CHUCK - SET
- For holding small drills in a drilling machine
- 3 interchangeable hardened collets
- Trueness-within 5 microns.
|
 |
| CAT
No. |
Collets Capacity
|
Min.
order Qty. |
Std.
pkg.
in Cartons |
| Inch |
mm |
| PC-75 |
0 to 1/32 |
0 to 0.75 |
250 |
500 |
| PC-15 |
1/32 to 1/16 |
0.75 to 1.5 |
250 |
500 |
| PC-25 |
1/16 to 3/32 |
1.5 to 2.5 |
250 |
500 |
5.ADAPTOR FOR
PORTABLE DRILL MACHINE
- Useful for long and heavy drilling
- Internal Morse Taper 2
- Thread size 5/8"x16 T.P.I
- Supplied with or without ejector (drift key).
|
 |
| CAT
No. |
Finish |
Min.
Order Qty. |
Std.
pkg. in Carton |
| ADM/FW-2 |
With ejector |
200 |
50 |
| ADM-2 |
Without ejector |
200 |
50 |
|
|
