|
|
1.STEEL
SQUARES
- Blade made from finest quality hardened spring steel
- Beam and blade ground for straightness & parallelism
- Squares have accurate right angles on inside and outside
- Available in A Grade Square and Workshop Grade Square.
|
 |
CAT No.
A Grade |
CAT No. Workshop
G Grade |
Blade Length from inner
edge to end of the Blade |
Min.
Order Qty. |
Standard
Packing |
| Inch |
MM |
| SSA-2 |
WSS-2 |
2 |
50 |
200 |
200 |
| SSA-3 |
WSS-3 |
3 |
75 |
200 |
200 |
| SSA-4 |
WSS-4 |
4 |
100 |
150 |
150 |
| SSA-6 |
WSS-6 |
6 |
150 |
150 |
75 |
| SSA-8 |
WSS-8 |
8 |
200 |
120 |
40 |
| SSA-10 |
WSS-10 |
10 |
250 |
100 |
25 |
| SSA-12 |
WSS-12 |
12 |
300 |
75 |
15 |
| SSA-18 |
WSS-18 |
18 |
450 |
20 |
10 |
| SSA-24 |
WSS-24 |
24 |
600 |
20 |
2 |
2.CENTER
SQUARE
- Made from tool quality alloy steel
- Blade hardened and tempered
- Designed for fast and accurate location of the center of
the face of a round bar or disc within the sizes mentioned.
|
 |
| CAT No. |
Work Diameter |
Min. Order Qty. |
Standard Packing |
| Inch |
MM |
| CS-1 |
1.1/2 |
38 |
200 |
200 |
| CS-2 |
3 |
75 |
120 |
60 |
5.ADJUSTABLE
STEEL SQUARE
- Working faces are hardened and ground
- Stock can be set and locked in any position by operating
Knurl nut
- Very useful to check square ness in places where
conventional squares cannot be used
- Supplied with two blades and a ruler.
|
 |
| CAT No. |
Blade Size |
Min.
Order Qty. |
Standard
Packing |
| Inch |
MM |
| ASS-4 |
4 |
100 |
200 |
200 |
3.DEGREE
PROTECTOR
- Graduated from 0o to 180o
in opposite
directions
- Adjustable arm set with knurled thumb nut
- Polished finish.
|
 |
| CAT No. |
Range |
Min. Order Qty. |
Standard Packing |
| Inch |
mm |
| DP-6 |
3.3/8x6 |
85x150 |
300 |
300 |
4.DEPTH GAUGE WITH
PROTRACTOR
- Graduated from 0o to 180o
in both
directions
- The Blade is adjustable throughout the length
- The Blade is adjustable angularly to any desired angle for
use as a protractor and also lengthwise when used as a depth gauge.
|
| CAT No. |
Length |
Min. Order Qty. |
Standard Packing |
| Inch |
mm |
| DGP-6 |
6 |
150 |
200 |
200 |
6.BORE
GAUGE
- For measuring of cylindrical bores
- Made from stainless steel
- Matt finish
- Graduations engraved for permanent use.
|
 |
| CAT No. |
Range MM |
Min. Order Qty. |
Standard Packing |
| BG/1-15 |
1 to 15 |
250 |
1000 |
7.WIRE
GAUGE - RECTANGULAR & ROUND
- Made from hardened steel
- Permanently deep etched graduations
- All gauges are surface ground
- Graduations in British and metric systems.
|
 |
| CAT No. |
Style |
Min. Order Qty. |
Standard Packing |
| WG-6 |
RECTANGULAR |
300 |
600 |
| WGR-3 |
ROUND |
300 |
600 |
|
|
