Precision Tools
 
20.ANGLE PLATES - SLOTTED
  • Made from close grained cast iron seasoned against distortion
  • Flatness and square ness to within 0.002" per 6"
  • Slots are milled for uniform size
  • Available in Webbed end : Machined on outside surfaces and edges
    Open end : Machined all over except slots.

ANGLE PLATES - SLOTTED

CAT No. Webbed end CAT No. Webbed end Length Height Width Min. Order Qty Std. Packing
Inch MM Inch MM Inch MM
APW-3 APO-3 3.1/2 90 3 75 2.1/2 62 20 20
APW-6 APO-6 6 150 5 125 4.1/2 112 12 4
APW-8 APO-8 8 200 6 150 5 125 8 2
APW-10 APO-10 10 250 8 200 6 150 6 2
APW-12 APO-12 12 300 9 225 8 200 4 1
   
  
  
21.MAGNETIC V - BLOCK
  • Most suitable for holding round and irregular shapes for scribing, grinding, measuring & machining
  • Magnetic force on all ground surfaces
  • Powerful holding force of minimum 180 lbs
  • Fine precision finish for use as an inspection device.

MAGNETIC V - BLOCK
CAT No. Length Width Height Min. 
Order Qty		 Min. 
Order Qty		 Std. 
Packing
Inch MM Inch MM Inch MM
MVB-4S SINGLE 4 100 3 75 3-3/4 95 5 to 65 36 6
MVB-4P PAIR 4 100 3 75 3-3/4 95 5 to 65 21 3
MVB-5S SINGLE 3.3/16 80 2-3/8 60 3-3/4 95 9 to 95 20 10
MVB-5P PAIR 3.3/16 80 2-3/8 60 3-3/4 95 9 to 95 12 4
  
   
  
22.V-BLOCKS AND CLAMPS - TOOL MAKERS
  • V-Block properly heat treated and stablised
  • Precisely machined and ground to close tolerance
  • Two blocks and two clamps (one pair) are supplied in one set.

V-BLOCKS AND CLAMPS - TOOL MAKERS
CAT No. Length Width Height Holding 
Capacity		 Min. 
Order Qty		 Std. 
Packing
Inch MM Inch MM Inch MM
VBT-30 1.5/8 40 1.1/4 32 1.1/4 32 25 30 30
VBT-35 2 50 1.1/2 37 1.1/2 37 37 20 20
VBT-45 1.3/4 45 1.7/16 36 1.5/8 40 32 20 20
VBT-60 2.3/8 60 2 50 1.5/8 40 30 20 10
VBT-70 2.3/4 70 1.5/8 40 1.3/4 45 37 20 10
VBT-75 3 75 2.3/16 55 2.3/16 55 40 16 8
VBT-80 3.3/16 80 2.5/8 65 2.5/8 65 50 8 4
VBT-100 4 100 3 75 3 75 75 8 4
  
  
  
23.V - BLOCKS
  • Manufactured from high quality casting properly seasoned against distortion
  • Accurately machined square and parallel
  • Matched pairs are numbered
  • 900 Vee is accurately centred.

V - BLOCKS

CAT No. Size of Block
MM		 Vee
MM		 Height
MM		 Thickness
MM		 Min. Order Qty. Standard Packing
VB-3 75 45 60 33 20 20
VB-4 100 56 65 40 30 10
VB-5 125 62 78 50 18 6
VB-6 150 78 88 62 24 4
VB-8 200 113 140 100 10 1
VB-10 250 125 165 125 6 1
VB-12 300 128 200 150 6 1
  
  
  
24.SURFACE MARKING BLOCK
  • Hardened steel base is ground and polished
  • V-Groove is base for cylindrical work
  • Fine adjustment of spindle to any angle above or below the base, enabling scriber to act as a depth gauge and height gauge
  • Two gauge pins in base for linear work.

SURFACE MARKING BLOCK
CAT No.

Base Dimension

 Spindle Length Min. Order Qty. Standard Packing
Inch MM Inch MM
SMB-47 2-3/16x1-5/8x3/4 55x40x20 7" with extra 4" spindle 175mm with extra 100mm spindle 80 40
SMB-912 3-1/8x2-1/2x1 80x63x25 12"  with extra 9" spindle 300mm with extra 225mm spindle 150 15
  
  
  
25.SCRIBBERS

SCRIBERS
CAT No. Total Length Specification
Inch MM
SCP-4 4 100 Pointed at one end and knife edge at one end.
SCP-6 6.3/4 170 Knurled body, pointed at one end and knife edge at one end.
SCP-10 10 250 Pointed at one end and knife edge at one end.
S-4 4.1/2 114 Single ended light duty  scriber with knurled body.
SST-9 7 175 Single ended scriber with knurled body.
S-8 7.1/2 190 Single ended scriber heavy duty.
SP-3 3.1/2 89 Scriber with hardened steel reversible point.
  
  
  
26.MICROMETER STAND (BASE)
  • An indispensable clamping device for precise and stable measurement
  • Most useful to speed up production and quality inspection
  • Provides desirable measuring position and angle for measurement
  • Allows clamping and positioning of the micrometer with a single clamp.

MICROMETER STAND (BASE)
CAT No. Min. Order Qty. Standard Packing
MS-1 30 15
  
   
  
27.MICROMETER STAND (BASE)
  • An indispensable clamping device for precise and stable measurements
  • Most useful to speed up production and quality inspection
  • Allows clamping and positioning of the micrometer with a single clamp.

MICROMETER STAND (BASE)
CAT No. Min. Order Qty. Standard Packing
MS-2 40 20